It is very common in industrial applications to face these problems: incompatible with thick glove operation, serious false touches by wet hands; partial non-response and false triggering when the screen is covered with oil, water stains and dust; insufficient front protection rating below IP65 allows dust and oil to penetrate inside, resulting in touch failure and panel yellowing. What core technologies do we adopt to solve these common industrial pain points?
Features of the Multi Touch Monitor 23.8 Inch1.Adopts an industrial-grade backlight module designed for
7×24 hours continuous operation, equipped with long-lasting LED beads to slow down light attenuation. It greatly reduces the risk of sudden brightness drop and backlight yellowing within half a year, and supports year-round uninterrupted operation.
2.Optimized touch sensing threshold supports direct operation with wet hands, ordinary rubber gloves and thin work gloves, reducing unresponsiveness and intermittent touch issues.
3.Increases the density of sensing electrodes, enhances touch sensitivity at edges and local areas, improves recognition rate for thick gloves and large-area pressing, and eliminates local disconnection and unresponsive touches.
4.Built-in anti-interference touch algorithm shields signal interference from humid environments, static electricity and cleaning mist. It ensures stable single-touch & multi-touch operation even with wet hands or gloves, without drift or disconnection.
5.It features an ultra-wide viewing angle of up to
178° horizontally and vertically, with no color shift, whitening or color inversion when viewed from any angle.
6.Adopts a full-lamination structure with no air gap, eliminating reflective glare and whitening at oblique viewing angles, further expanding the effective viewing angle and delivering a clear, non-gray picture.
7.The whole machine adopts a
universal modular structure. The touch screen, LCD, driver board and enclosure are standardized and interchangeable, which reduces the cost of non-standard customization.
8.Standardized serial port, USB, LVCC, and power supply interfaces support plug‑and‑play with mainstream motherboards and industrial PCs. No mold modification or custom programming is required, saving both
project adaptation cost and
selection cost.
FAQ1.Q: Can this monitor be used with wet hands or work gloves?A: Yes. The touch screen has optimized sensing threshold and increased electrode density, supporting stable operation with wet hands, thin work gloves and ordinary rubber gloves, without disconnection or drift.
2.Q: Will the screen be hard to see in strong sunlight or side view?A: No. It uses outdoor high-brightness panel + AG anti-glare glass + full lamination technology, with 178° ultra-wide viewing angle, no reflection, no whitening and clear picture even in direct light.
3.Q: Is it suitable for 7×24 industrial continuous operation?A: Yes. It uses industrial-grade backlight and long-life LED beads, which slow down light attenuation and avoid brightness drop or yellowing, supporting long-term uninterrupted use.
4.Q: Does it require complicated calibration or debugging?A: No. The screen is calibrated at the factory with real-time self-calibration function. No manual calibration is needed, even after long-term use or host replacement.
5.Q: Is it compatible with my existing industrial computer?A: Yes. It adopts standardized interfaces and modular design, supporting plug-and-play with mainstream motherboards and industrial PCs, no custom mold or program required.
Recommend Products:1.small size 7 inch front ip65 waterproof high brightness capacitive 10 touch points touch screen monitor2.High Brightness 12.1 Inch Multiple Touch Points Industrial Touch Screen Monitor3.Industrial-grade 15.6 inch 10 Touch Points Interactive Factory Capacitive Touch Monitor4.12.1 Inch 4:3 Industrial-grade Capacitive Touch Monitor for Outdoor Vending Machine5.IK10 Vandalproof 10 Touch Points 12.1 Inch Capacitive Touch Screen Monitor for Vending Machine
